Robot
+ Box filling system
+ Conveyor
+ Granulator
+ Dryer, Loader & Temp. Controller
+ Other equipment
+ EOAT
+ Clean Room Robot
Get acrobat
 
Sprue Pickers EX Series BACK
    
EX-250 Series

Features
  • Simple design
  • Outstandingly energy saving design
  • Safety functions of safety latch and E-stop buttons
  • Virtually maintenance free
  • Customer-oriented and efficient design
  • Easy and quick setup capabilities

Press range: 150 to 450 tons
Download
Dimensions | EX-250 | EXF-250 | EX-350 | EXF-350 |
| EX-450 | EXF-450 |
Specification
Model
EX-250
 EXF-250 EX-350 EXF-350 EX-450 EXF-450
IMM range (tons) 150 - 250 150 - 250 250 - 350 250 - 350 350 - 450 350 - 450
Main arm vertical stroke
(mm)		 MAX650 MAX650 MAX750 MAX750 MAX850 MAX850
Sub arm vertical stroke
(mm)		 - - - - - -
Main arm kick stroke
(mm)		 MAX125 MAX125 MAX125 MAX125 MAX125 MAX125
Sub arm kick stroke
(mm)		 - - - - - -
Swing angle(°) 50 - 90 50 - 90 50 - 90 50 - 90 50 - 90 50 - 90
Wrist rotation(°) - 90 - 90 - 90
Air consumption(NL/cyc) 11.6 11.6 11.7 11.7 11.8 11.8
Working air pressure(MPa) 0.6 0.6 0.6 0.6 0.6 0.6
Max. payload(kg) 2.0 1.0 2.0 1.0 2.0 1.0
Power supply(V) Single phase AC200(50/60Hz)
Power consumption(W) 16.2
Control system Stored program
*Additional 23N_/min is consumed when vacuum ejector is used.
Controller

 PC-MXII

  • Handheld controller for single arm configuration
  • Standard 16 mold setup memory to reduce setup time significantly
  • Standard 8 sequences
  • Timer controlled operations
  • Part verification on/off key
  • Picture keys for easy operation
  • Home key for simple operation
  • Step key for sequence confirmation

 PC-EIID  

  • Single- and dual-arm (G type) configuration
  • Proven programmable controller
  • Digital timer setup
  • Standard ejector timing control and cycle start signals
Functions

 Typical options
PC-MXII

  • Conveyor start signal
  • Home position at swing-out
  • Sprue release on the way back (vacuum specification only)
  • 2nd descent on/off switch
  • Vacuum ejector
  • Part grip piping
  • Main external verification
  • Custom color
 PC-EIID
  • Parts grip
  • Vacuum ejector
  • Sprue release on the way back
  • EOAT nipper
  • Pressure adjustable bladed gripper
  • Base mounted nipper
  • Home position at swing-out
  • Reject release in mold area
  • Air blow
  • Conveyor start signal
  • Part grip piping
  • Main external verification
  • Sub external verification
  • Signal light
  • Custom color

top