Robot
+ Box filling system
+ Conveyor
+ Granulator
+ Dryer, Loader & Temp. Controller
+ Other equipment
+ EOAT
Get acrobat
 
Servo driven traverse robot(Cost effective)HASIIe seriesBACK
    
HASIIe-80S(G-V)

Features
  • 3/5-axis digital servo driven traverse robot
  • Heavy duty body
  • Controller cabinet mounted on the body
  • Intuitive and easy operation
  • Press range: 40 to 80 tons
Download
CatalogDimensions
Specification
Model HASIIe-
80SW		 HASIIe-
80GW-V		 HASIIe-
80S		 HASIIe-
80G-V
Main arm vertical stroke
(mm)		 650 650(550)
Sub arm vertical stroke
(mm)		 - 700(600) - 700(600)
Main arm kick stroke
(mm)		 410(100 - 510) 420(100 - 520)
Sub arm kick stroke
(mm)		 - 200(100 - 300) - 235(65 - 300)
Traverse stroke
(mm)		 1300 1300
Gripper height
(mm)		 145  145 200 145 - 145 200
Max. distance between main arm and platen
(mm)		 510 520
Min. distance between sub arm and platen
(mm)		 - 100 - 65
Max. payload(kg) 3(including EOAT)
Weight (kg) 200 225 195 215
Working air pressure(Mpa) 0.6
Air consumption(NL/cycle) 0.7* 0.8* 0.7* 0.8* 
Drive system Digital AC servo motor(Traverse/Vertical/Kick)
Control system PTP•CP
Power supply(V) 3 phase 200VAC±10%  50H/60Hz

*Additional 63Nl/min is consumed when vacuum ejector is used.
Values in parenthesis are optional.
Controller

Intuitive and easy-to-operate controller

  • Compact pendant with excellent grip feeling
  • Easily viewable 6.5 in. color LCD
  • As light as 800 g
  • Touch panel interface
  • 50 mold data storable
  • Battery replacement interval of 7 years
Functions

Standard

  • A vacuum ejector circuit
  • A part gripper circuit
  • A main sprue grip circuit
  • Palletizing(99 points per axis)
  • En-route wrist flip
  • Internal mold memories for 50 molds
  • Counter for initial rejects
  • Fine position adjustment during operation
  • Takeout from moveable and fixed molds
  • Pass motion(short cut)
  • Home positions(above mold, on traverse beam)
  • Alarm history

 Typical Option

  • Additional part grip circuits(up to two)—A circuit standard
  • Additional vacuum ejector circuits(up to two)—A circuit standard
  • Vacuum break ejector(up to two)—Preventing parts from sticking to vacuum cup
  • EOAT nipper circuit— Nipper(s)in EOAT
  • Nipper sliding valve— More accurate cutting
  • Traverse end nipper— Nipper(s)at the end of traverse frame
  • Conveyor output— Conveyor start signal
  • Box filling system output— Box filling unit start signal
  • Signal tower— Red and green
  • Custom color— User specified color
  • EOAT quick change —Easy EOAT setup
  • Extended main arm strokes
  • Extended sub arm strokes
  • Extended kick strokes
  • Extended traverse strokes
  • Extended rear traverse strokes
    Multi-row placing(2 locations)—Individual placement of parts

top