| |
|
|
Robots
for precision molded parts SH/PH/UT Series
|
| SH-400G |
| Features |
- Side entry robot for precision molding
- Long stroke applicable for up to 50 tons of press
- Low overhead installation
- High cycle
- Low impact on a press for consistent molding operation
- Small footprint for secondary equipment
- Wrist rotation (90Á) to work with secondary equipment
- Part verification camera (option)
- For three-plate mold
|
| Download |
  |
| Specification |
| Model |
SH-400G |
| Press range (ton) |
(5 - 15)
|
| X1 entry stroke (mm) |
520
|
| Y1 strip stroke (mm) |
213 - 438
|
| X2 entry stroke (mm) |
520 |
| Y2 strip stroke (mm) |
150 - 375
|
| Min. distance between gripper
and frame (mm) |
102
|
| Max. distance between gripper
and frame(mm) |
438
|
| Wrist rotation (°) |
90 |
| Max. payload (kg) |
1[2](including EOAT)*
|
| Machine weight (kg) |
125
|
| Overall height x width x depth
(mm) |
(782+nozzle center) x 682 x
1090
|
| Working air pressure (Mpa) |
0.5
|
Air consumption(N /min) |
1.2 |
| Control system |
PTP•CP
|
| Power supply (V) |
Single phase 200VAC±10%
50H/60Hz
|
| Power consumption (W) |
Max.460
|
Note 1: Max. payload
includes EOAT weight.
Note 2: For air consumption, additional 70NL/min is
consumed in using vacuum ejector.
* Gain adjustment allows max. 2 kg.
|
| Controller |
|
HRS-110
 7.7
inch 128 color LCD
- 20 mold setup memory
- Safety switch to avoid mis-operation
|
| Option |
- Vacuum system with vacuum break
- Air blow circuit
- Special safety guard
|
|
|
|
