|
|
|
Robots
for precision molded parts SH/PH/UT Series
|
SH-700 |
Features |
- Side entry robot for precision molding
- Long stroke applicable for up to 50 tons of press
- Low overhead installation
- High cycle
- Low impact on a press for consistent molding operation
- Small footprint for secondary equipment
- Wrist rotation (90Á) to work with secondary equipment
- Part verification camera (option)
|
Download |
|
Specification |
Model |
SH-700 |
Entry stroke(mm) |
750
|
Strip stroke(mm) |
315 |
Min. distance between gripper
and frame (mm) |
72
|
Max. distance between gripper
and frame(mm) |
445 |
Wrist rotation(°) |
90
|
Max. payload (kg) |
1
(2)(including EOAT)*
|
Machine weight(kg) |
130
|
Working air pressure (Mpa) |
0.5
|
Control system |
PTPCP
|
Power supply(V) |
3 phase 200VAC±10% 50H/60Hz
|
Power consumption(W) |
340(MAX)
|
*Max. payload
is obtained by gain adjustment.
|
Controller |
HRS-110
- 7.7
inch 128 color LCD
- 20 mold setup memory
- Safety switch to avoid mis-operation
|
Option |
- Vacuum system with vacuum break
- Air blow circuit
- Special safety guard
|
|
|
|