+ Robot
+ Box filling system
+ Conveyor
+ Granulator
Dryer, Loader & Temp. Controller
+ Other equipment
+ EOAT
+ Clean Room Robot
Get acrobat
 

Mold Temperature Controller (Water and Oil Types)
HMC-F series

Features

HMC-F743A
HMC-F746A
HMC-F503O
HMC-F1108O

  • Nineteen percents smaller footprint than our predecessor.
  • Larger set value and process value displays.
  • Almost the same control panal as THD-F series dryer.
  • Mold memory allows you to save 100 setups of set value and timer value.
  • Start timer is settable up to 99 hours and 59 minutes.(15 hour backup)
  • Stop timer is settable up to 99 hours and 59 minutes.
  • Display power off turns off display during start timer run for energy saving.
  • Maintenance notification notifies you when you should service,according to the predetermined time.
  • Infrared remote control (option) allows cable-less remote operation.
  • Return temperature monitor (option) displays return fluid temperature with differential between the return and supply temperatures.
  • Mold memory reset (option) externally changes the current mold memory no.to 00.
  • External output indicates what process temperature is normal and/or what differential temperature is normal,in operation.
Download
製品カタログ
寸法図 |HMC-F743A|HMC-F746A|
|HMC-F503O|HMC-F1108O|
Specification
Model HMC-F743A HMC-F746A HMC-F503O HMC-F1108O
IMM size (ton) 150 or less 250 or less 100 or less 200 or less
Power supply (V) 3phase 200AC (50/60Hz)
Rated power (W) 3940 6940 3718 9424
Power
equipment
capasity (VA)		 4212 7212 3927 9792
Rated current (A) 13.1 21.8 11.35 28.3
Breaker (A) 15A 30A 15A 30A
Fluid Water Oil
Temperature control range *1 (°C) 50 ~ 95 60 ~ 160
Pump motor 0.74kW2P(50Hz/60Hz) 0.5kW2P
(50Hz/60Hz)		 1.1kW2P
(50Hz/60Hz)
Pump type Multi stage centrifugal Cascade sealless
Pump pressure *2 60Hz 0.37MPa
(at 20/min)		 0.51MPa
(at 20/min)		 0.48MPa
(at 10/min)		 0.54MPa
(at 15/min)
50Hz 0.25MPa
(at 20/min)		 0.34MPa
(at 20/min)		 0.33MPa
(at 10/min)		 0.45MPa
(at 15/min)
Pump flow *2 60Hz 50/min
(at 0.33MPa)		 50/min
(at 0.44MPa)		 24/min
(at 0.20MPa)		 52/min
(at 0.15MPa)
50Hz 50/min
(at 0.21MPa)		 50/min
(at 0.28MPa)		 18/min
(at 0.20MPa)		 45/min
(at 0.15MPa)
Tubing Fluid supply G3/8 x 2pcs
Fluid drain G3/8 x 2pcs
Water supply ¢ 9 hose
Water drain ¢ 9 hose
Heater 3.0kw 6.0kw 3.0kw 8.0kw
Control method Heating/Cooling PID
Cooling method Direct Indirect
Capacity () 1.3 ( Entire 2.3) 2.5 ( Entire 4.0) 2.5 ( Entire12.0)
Weight (kg) 47.0 49.0 52.0 86.0
*1.The lower temperature limit of HMC-F743A & F746A can vary with the temperature of supplied water.
*2.Pump pressure and flow are based on water applicaiton.
Option
  • Communication with HRX-i Series robot
    •
  • Fluid hose
  • Hose fittings
  • Air purge
  • 24 hour time switch
  • Weekly time switch
  • Audible alarm
  • Signal light
  • Mold memory no.reset
  • Infrared remote control
  • External output
  • Different voltage
  • Earth voltage breaker
  • Remote control input
  • External sensor
  • Return temperature sensor
  • Power plugs
  • 4-port manifold
  • Cooling water filter
  • Custom color

top