HARMO PRODUCTS Motor Dryer, Loader, & Temp. Controller

+	Robot
+	Box filling system
+	Conveyor
+	Granulator
	Dryer, Loader & Temp. Controller
+	Other equipment
+	EOAT
+	Clean Room Robot

HMC-F series

Features

HMC-F554H
HMC-F558H
HMC-F754H
HMC-F758H

Nineteen percents smaller footprint than our predecessor.
Larger set value and process value displays.
Almost the same control panal as THD-F series dryer.
Mold memory allows you to save 100 setups of set value and timer value.
Start timer is settable up to 99 hours and 59 minutes.(15 hour backup)
Stop timer is settable up to 99 hours and 59 minutes.
Display power off turns off display during start timer run for energy saving.
Maintenance notification notifies you when you should service,according to the predetermined time.
Infrared remote control (option) allows cable-less remote operation.
Return temperature monitor (option) displays return fluid temperature with differential between the return and supply temperatures.
Mold memory reset (option) externally changes the current mold memory no.to 00.
External output indicates what process temperature is normal and/or what differential temperature is normal,in operation.

Download

Specification

Model		HMC-F554H	HMC-F558H	HMC-F754H	HMC-F758H
IMM size (ton)		150 or less		250 or less
Power supply (V)		3phase 200AC (50/60Hz)
Rated power (W)		4801	8693	5036	9036
Power equipment capasity (VA)		5000	9013	5294	9307
Rated current (A)		14.45	26.05	15.3	26.9
Breaker (A)		20	30	20	30
Fluid		Water
Temperature control range *1 (°C)		50 ~ 120
Pump motor		0.55kW2P(50Hz/60Hz)		0.75kW2P (50Hz/60Hz)
Pump type		Multi stage centrifugal
Pump pressure *2	60Hz	0.32MPa (at 13/min)		0.41MPa (at 24/min)
Pump pressure *2	50Hz	0.23MPa (at 13/min)		0.29MPa (at 20/min)
Pump flow *2	60Hz	48/min (at 0.12MPa)		89/min (at 0.12MPa)
Pump flow *2	50Hz	40/min (at 0.1MPa)		75/min (at 0.09MPa)
Tubing	Fluid supply	G3/8 x 2pcs
	Fluid drain	G3/8 x 2pcs
	Water supply	¢ 9 hose
	Water drain	¢ 9 hose
Heater		4.0kw	8.0kw	4.0kw	8.0kw
Control method		Heating/Cooling PID
Cooling method		Direct
Capacity ()		approx.1.2	approx.2.4	approx.1.2	approx.2.4
Weight (kg)		67.0	73.0	70.0	76.0

*1.The lower temperature limit can vary with the temperature of supplied water.
*2.Pump pressure and flow are based on water applicaiton.

Option

Communication with HRX-i Series robot