| |
|
|
GranCutter
for SOFT materials SPCII-S Series
|
| SPCII-1500S |
| Features |
- Very little dust
The cutters do not re-cut the sprues and runners in
the same place, thus minimizing dust production, static
electricity, and heat generation.
- Very few miscuts
The spacing between the blades approximately duplicates
the size of the original material pellets, so sprues
and runners get granulated to roughly the same dimension.There
are very few miscuts.
- Quiet operation
Cutting is held to a minimum, thus the machine is
very quiet.
- Easy cleaning
Because there is minimal static electricity produced,
any dust created doesn't adhere to interior surfaces.
Moreover, two large panel doors open downward to afford
greater cleaning convenience, and, ultimately, significantly
shorten cleaning time and downtime. (Average cleaning
time:5-7 minutes)
 |
 |
 |
| The hinged hopper ensures safety operation. |
The hopper faces in three directions and
can be clamped. |
Large casters are used.
|
 |
 |
|
8m/m press cutter is installed as standard.
|
Standard suction tank
|
|
|
| Download |
  |
| Specification |
| Model |
SPCII-1500S |
| Place of operation |
Indoor |
| Power |
3-phase 200VAC |
| Motor |
Geared motor 1.5kw-3P, grounded |
| Power plug |
Twist-locking grounded 3P 20A |
| Rotary cutter |
ø220mm 4pcs• Blade thickness
30mm 37.5rpm/50Hz• 45rpm/60Hz |
| Press Moving
Cutter |
3.8mm x 6mm 45pcs |
| 112.5cycles/min (50Hz)•135cycles/min
(60Hz) |
| Hopper mouth |
402mm x 360mm |
| Sprue diameter to cut |
13mm or smaller |
| Throughput |
Intermittent feeding, max.320-400g
per minute |
| Capacity of suction tank |
Approx. 9 liters (4Kg) |
| Color |
Harmo standard color |
| Weight |
295kg |
*) This value is for a sprue, Thermoplastic
Elastomer, 6mm-max diameter, 3g-weight. |
| Standard Equipment |
|
 Standard
Accessory
- Cleaning awl
- Suction tank for level gauge
- Level gauge to stop feed at full
|
| Available Options |
|
Optional
Accessory
|
|
|
|
