+ Robot
Box filling system
+ Conveyor
+ Granulator
+ Dryer, Loader & Temp. Controller
+ Other equipment
+ EOAT
+ Clean Room Robot
Get acrobat
 
 
STP-V01

Features
  • Inverter motor drive for horizontal and vertical axes
  • Sixteen (16) percent less price than our predecessor
  • Twenty seven (27) percent smaller footprint compared to our predecessor
  • Reduced box change time as short as 15 seconds
  • Custom box sizes acceptable (See Mechanical Specification)
  • Controller-on-body design for space saving
  • Standard palletizing capability
  • Standard three-light signal tower (red, yellow, and green)
Download
CatalogDimensions
Specification
Mechanical Specification
Outer dimensions (L x W x H) (mm)
165 X 716 X 1825
Max. parts receiving height(mm) 1600
Max. horizontal travel(mm) 1000
Weight capacity (including boxes)(kg) 10
Max. box size(mm) 800(L) - 500(W)
Box change time(seconds) 15
Palletizing stop accuracy(mm) ±1 See Note.
Working air pressure(Mpa) 0.5
Standard conveyor size(mm) 1660 (300 pitch)
Optional conveyor size(mm)
IN conveyor
(Chain)
1.0 to 3.0m at 0.5m intervals (300 pitch)
OUT conveyor
(Roller)
300, 400, 500 or 600 wide
1.0 to 3.0m at 0.5m intervals
  
Controller Specification
Power supply(V) 3-phase, 200VAC 50/60Hz
Allowable voltage fluctuation ±10%
Allowable frequency fluctuation ±5%
Current consumption(A) 10
Rated power(W) 500
Drive motor(KW) 0.2 for both axes, gear ratio 1/20
Control system Stored program

Note : Practically, allow for the clearance between fingers and a box.
Controller

  STP dedicated controller

  • User-friendly 5 inch touch panel interface
  • Max. 40 mold setups
  • Easy and intuitive operation
Option
  • A wide variety of IN conveyors
  • A wide variety of OUT conveyors
  • A complete range of arms
  • A broad selection of fingers

TOP