| |
|
|
GranCutter
for SOFT materials SPCII-S Series
|
| SPCII-400S |
| Features |
- Very little dust
The cutters do not re-cut the sprues and runners in
the same place, thus minimizing dust production, static
electricity, and heat generation.
- Very few miscuts
The spacing between the blades approximately duplicates
the size of the original material pellets, so sprues
and runners get granulated to roughly the same dimension.There
are very few miscuts.
- Quiet operation
Cutting is held to a minimum, thus the machine is
very quiet.
- Easy cleaning
Because there is minimal static electricity produced,
any dust created doesn't adhere to interior surfaces.
Moreover, two large panel doors open downward to afford
greater cleaning convenience, and, ultimately, significantly
shorten cleaning time and downtime. (Average cleaning
time:5-7 minutes)
- Soft materials are okay
With the SPCII-S Series Grancutter, previously incompatible
soft materials can now be granulated.
|
| Download |
  |
| Specification |
| Model |
SPCII-400S |
| Place of operation |
Indoor |
| Atmospheric temp (°C) |
-10~+40 |
| Atmospheric humidity
(%) |
~85 |
| Power Input (V) |
3-phase AC200(50Hz/60Hz) |
| Motor |
Geared motor 0.4KW-4P |
| Rotary Cutter |
130mm diam, 4pcs• 37.5rpm/50Hz•
45rpm/60Hz |
| Press Moving
Cutter |
3.0mm x 5.5mm 27pcs |
| 75cycles/min (50Hz)•90cycles/min
(60Hz) |
| Mouth on main body (mm) |
162 x162 |
| Hopper throat (mm) |
200 x 162 |
| Material Tank (volume)
(L) |
- |
| Sprue diameter for cutting
(mm) |
ø8mm or smaller |
| Processing capacity (
*) |
Intermittent feeding, 90~120g max.
per minute |
| Machine Weight (kg) |
100 |
*) This value is for a sprue, Thermoplastic
Elastomer, 6mm-max diameter, 3g-weight. |
| Standard Equipment |
|
 Standard
Accessory
- Standard Hopper
- Eyeleteer for cleaning
- Stainless chute for paper bag
|
| Available Options |
|
Optional
Accessory
- Signal tower
- Emargency stop button
- Auxiliary chute
- Safty hopper("Z"Model)
- Drum hopper
- Buzzer
- 2kg vacuum tank with a 30mm nozzle
|
|
|
|
